ACERACK pallet racking
  Designed and Optimised in Australia

AceRack Mark 7 Pallet Racking is designed and optimised in Australia to Australian Standards AS4084-1993 Steel Storage Racking and AS4600:1996 Cold-Formed Steel Structures. Compatible with Australia’s leading racking product, the AceRack Pallet Racking system provides even greater value with a host of quality features in design, manufacture and operation.

Compare the features below to your current offering. AceRack gives greater value with high quality features at a more competitive price.

Superior Box Beam – The box beam section has greater resistance to frontal impact and much higher torsional stiffness.

Beams welded at top of connector – Using higher strength beam sections allows AceRack Mark 7 beams to be welded at the top of the connector.

4 Hook Connector – All AceRack heavy duty beams use 4 hook connectors for high load applications.

Stronger Upright with Rear Flange – AceRack Mark 7 is formed with a rear flange on all uprights to give higher strength with greater resistance to impact.

Powder Coated components – Beams are powder coated Bistro Orange whilst upright frames and bracing are powder coated Blaze Blue.

Available Rack Heights

Racking to suit standard Australian 1168mm x 1168mm pallets is 838mm deep and is available in the following heights:

2438mm (8’)
3048mm (10’)
3658mm (12’)
4267mm (14’)
4877mm (16’)
6096mm (20’)

Note: Please feel free to contact us regarding rack heights not listed above.

Standard Beam lengths available are:

1372mm (1 pallet)
2591mm (2 pallet)
2743mm (2 pallet)
3048mm
3353mm
3660mm
3810mm (3 pallet)

Check out our Pallet Rack Accessories page for further information.